Hostname: page-component-7b7567c8c-48dgx Total loading time: 0 Render date: 2026-11-18T09:07:49.414Z Has data issue: false hasContentIssue false

An Investigation of Au-Ag Interface Formed by Cold Welding Using Focused Ion Beam/Transmission Electron Microscopy

Published online by Cambridge University Press:  26 February 2011

Yifang Cao
Affiliation:
yifang.cao@gmail.com, Princeton University, Department of Mechanical and Aerospace Engineering, 1 Olden Street, Princeton, NJ, 08544, United States
Nan Yao
Affiliation:
nyao@princeton.edu, Princeton University, Princeton Institute for the Science and Technology of Materials (PRISM), Princeton, NJ, 08544, United States
Kevin McIlwrath
Affiliation:
nyao@princeton.edu, Hitachi High Technologies America, Pleasanton, CA, 94588, United States
Jikou Zhou
Affiliation:
jkzhou@princeton.edu, Princeton University, Princeton Institute for the Science and Technology of Materials (PRISM), Princeton, NJ, 08544, United States
Gabriel Osinkolu
Affiliation:
gemini_cyf@yahoo.com, Obafemi Awolowo University, Center for Energy Research and Development, Ile-Ifa, N/A, Nigeria
Winston O. Soboyejo
Affiliation:
soboyejo@princeton.edu, Princeton University, Princeton Institute for the Science and Technology of Materials (PRISM), Princeton, NJ, 08544, United States
Get access

Abstract

This paper reports the recent results of a transmission electron microscopy study of cold-welded and e-beam deposited Au-Ag interfaces. Dust particles were observed to be embedded between the cold-welded interfaces. These are shown to amplify the defect regions caused by surface asperities. Electron energy loss spectroscopy (EELS) analysis revealed that there was no significant diffusion zone across the cold welding interface. However, sub-micron mechanical twining structures were revealed by transmission electron microscopy (TEM) analyses. These were found to penetrate through both the cold-welded and control Au-Ag interfaces, but with different orientations.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable