Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T03:49:11.519Z Has data issue: false hasContentIssue false

Analysis of junctions formed in strained Si/SiGe substrates

Published online by Cambridge University Press:  17 March 2011

G. Eneman
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, BelgiumK.U.Leuven, ESAT-INSYS, 3001 Leuven, BelgiumResearch assistant of The Fund for Scientific Research – Flanders, (Belgium)
E. Simoen
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
A. Lauwers
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
R. Lindsay
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
P. Verheyen
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
R. Delhougne
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, BelgiumK.U.Leuven, ESAT-INSYS, 3001 Leuven, Belgium
R. Loo
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
M. Caymax
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
P. Meunier-Beillard
Affiliation:
Philips Research Leuven, affiliated to the IMEC/LD Group
S. Demuynck
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, Belgium
K. De Meyer
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, BelgiumK.U.Leuven, ESAT-INSYS, 3001 Leuven, Belgium
W. Vandervorst
Affiliation:
IMEC vzw, Kapeldreef 75, B-3001 Leuven, BelgiumK.U.Leuven, ESAT-INSYS, 3001 Leuven, Belgium
Get access

Abstract

Junctions were formed in thin SiGe/strained Si substrates with a thickness of 250-350 nm to assess the effect of different buffer layer parameters (bandgap, dislocations, thickness) on the junction leakage density that can be expected in MOSFET devices. The implantations used are standard well, channel and Highly Doped Drain (HDD) implants. Both p+/n and n+/p junctions were evaluated. The total thickness of the buffer layers was varied to compare the effect of different structural layers on the diode leakage. This investigation shows that the effect of an increased defect density is dominant at room temperature for the strained Si samples, resulting in 4-5 orders of magnitude increase in leakage. However, there is a different gradation in leakage dependence for thick and thin buffer layers, especially at higher temperatures.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable