Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T16:45:38.943Z Has data issue: false hasContentIssue false

Analytical Simulation of an Improved Cvi Process for Forming Highly Densified Ceramic Composites

Published online by Cambridge University Press:  21 February 2011

Nyan-Hwa Tai
Affiliation:
Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, Delaware 19716
Tsu-Wei Chou
Affiliation:
Center for Composite Materials and Department of Mechanical Engineering, University of Delaware, Newark, Delaware 19716
Get access

Abstract

A model for chemical vapor infiltration (CVI) under pressure and temperature gradients is applied to the study of deposition of SiC from the pyrolysis of CH3SiCl3 within a 3-D woven fibrous preform. The model considers the infiltration of reactants into a preform with temperature gradients by applying a pressure gradient between the vapor inlet and outlet; it also takes into account the variation in concentration of the vapor precursor. A quasi-steady state approach has been adopted to simulate the matrix deposition in a 3-D unit cell. The density distribution, consolidation profile, and total fabrication period have been theoretically predicted.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable