Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T17:19:16.524Z Has data issue: false hasContentIssue false

Antireflection coatings for solar panel power output enhancement

Published online by Cambridge University Press:  21 May 2015

Gopal G. Pethuraja
Affiliation:
Magnolia Solar, Inc., 251 Fuller Road, Albany, NY 12203, USAEnergy and Environmental Applications Center (E2TAC), College of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, NY 12203, USA
Roger E. Welser
Affiliation:
Magnolia Solar, Inc., 251 Fuller Road, Albany, NY 12203, USA
John W. Zeller
Affiliation:
Magnolia Solar, Inc., 251 Fuller Road, Albany, NY 12203, USA
Yash R. Puri
Affiliation:
Magnolia Solar, Inc., 251 Fuller Road, Albany, NY 12203, USA
Ashok K. Sood
Affiliation:
Magnolia Solar, Inc., 251 Fuller Road, Albany, NY 12203, USA
Harry Efstathiadis
Affiliation:
Energy and Environmental Applications Center (E2TAC), College of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, NY 12203, USA
Pradeep Haldar
Affiliation:
Energy and Environmental Applications Center (E2TAC), College of Nanoscale Science and Engineering, SUNY Polytechnic Institute, Albany, NY 12203, USA
Jennifer L. Harvey
Affiliation:
NYSERDA, 17 Columbia Circle, Albany, NY 12203, USA
Get access

Abstract

The impact of nanostructured broadband antireflection (AR) coatings on solar panel performance has been projected for a broad range of panel tilt angles at various locations. AR coated films have been integrated on test panels and the short-circuit current has been measured for the entire range of panel tilts. The integration of the AR coatings resulted in an increase in short-circuit current of the panels by eliminating front sheet reflection loss for a broad spectrum of light and wide angle of light incidence. The short-circuit current enhancement is 5% for normal light incidence and approximately 20% for off-angle light incidence. The National Renewable Energy Laboratory (NREL) System Advisor Model (SAM) predicts that this AR coating can yield at least 6.5% improvement in solar panel annual power output. The greatest enhancement, approximately 14%, is predicted for vertical panels. The AR coating’s contributions to vertical mount panels and building-integrated solar panels are significant. This nanostructured broadband AR coating thus has the potential to lower the cost per watt of photovoltaic solar energy.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable