Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T07:50:46.287Z Has data issue: false hasContentIssue false

Asymmetric membranes with controlled morphology from modified polyetheretherketone (PEEKWC): preparation and characterization.

Published online by Cambridge University Press:  11 February 2011

M. G. Buonomenna
Affiliation:
Institute of Membrane Technology (ITM-CNR), c/o University of Calabria, Via P. Bucci, Cubo 17/c, 87030 Rende (CS), Italy.
A. Figoli
Affiliation:
Institute of Membrane Technology (ITM-CNR), c/o University of Calabria, Via P. Bucci, Cubo 17/c, 87030 Rende (CS), Italy.
J. C. Jansen
Affiliation:
Institute of Membrane Technology (ITM-CNR), c/o University of Calabria, Via P. Bucci, Cubo 17/c, 87030 Rende (CS), Italy.
M. Davoli
Affiliation:
Institute of Membrane Technology (ITM-CNR), c/o University of Calabria, Via P. Bucci, Cubo 17/c, 87030 Rende (CS), Italy.
E. Drioli
Affiliation:
Institute of Membrane Technology (ITM-CNR), c/o University of Calabria, Via P. Bucci, Cubo 17/c, 87030 Rende (CS), Italy.
Get access

Abstract

Asymmetric membranes were prepared from modified poly(ether ether ketone), PEEKWC, by the nonsolvent induced phase separation (NIPS) technique. The influence of the type of solvent and polymer concentration in the casting solution on the morphology, bubble point and on the gas and water transport properties of the membranes were studied.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable