Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-16T17:32:15.802Z Has data issue: false hasContentIssue false

Atomic Force Microscopy Studies of Fracture Surfaces From Oxide / Polymer Interfaces

Published online by Cambridge University Press:  21 March 2011

Maura Jenkins
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, U.S.A
Jeffrey Snodgrass
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, U.S.A
Aaron Chesterman
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, U.S.A
Reinhold H. Dauskardt
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, U.S.A
John C. Bravman
Affiliation:
Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, U.S.A
Get access

Abstract

Atomic Force Microscopy (AFM) is used to characterize fracture surfaces in silicon oxide / silane adhesion promoter / BCB polymer systems. Fatigue striations were found on some samples, and these were correlated with the crack growth rate per fatigue cycle. X-ray Photoelectron Spectroscopy (XPS) was used to identify the species present on each surface, and it was found that striations only form when the fracture path is through the polymer.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable