Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-16T21:00:27.490Z Has data issue: false hasContentIssue false

Atomistic Modeling of Interfacial Diffusion in the Lamellar Li0 TiAl

Published online by Cambridge University Press:  15 February 2011

M. Nomura
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania, 19104-6272
D. E. Luzzi
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania, 19104-6272
V. Vitek
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania, 19104-6272
Get access

Abstract

Atomistic simulation employing many-body central-force potentials was performed to elucidate the diffusion mechanisms in the bulk and at lamellar interfaces assuming a vacancy mechanism. First the self- diffusion of Ti and Al in stoichiometric structures was studied. It was found that the diffusion was faster along lamellar interfaces than in the bulk; the effective activation energy for the diffusion coefficient is about ∼15% lower. The simulations were then extended to investigate diffusion along lamellar boundaries with segregated Ti which is likely in Ti rich alloys. The surprising result is that diffusion remains practically unchanged when compared with the stoichiometric case. The reason is that while the path controlling the diffusion is different, the corresponding effective formation and migration energies are practically the same as in the stoichiometric case.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable