Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T01:54:21.932Z Has data issue: false hasContentIssue false

Automatic Control to Prevent Thermal Runaway During Microwave Joining of Ceramics

Published online by Cambridge University Press:  25 February 2011

Guy O. Beale
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA 22030
Francisco J. Arteaga
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, VA 22030
Get access

Abstract

A temperature control system is designed and simulated for microwave joining of ceramics. The objective is to develop a control system for reliable, high quality joints to be produced on a variety of ceramics. The described procedure permits the derivation of a closed-loop configuration for controlling temperature. The ceramics (alumina) heating model equation is linearized around an operating point and represented as a transfer function. Conditions for closed-loop stability with any linearized model are presented and mathematically proven. A computer simulation is implemented for the closed-loop control and numerical integration is used for solving the non-linear heating equations. Results are very good and show that the temperature can be regulated to a set point value and thermal runaway in the ceramics can be prevented.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable