Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T11:52:37.516Z Has data issue: false hasContentIssue false

Avalanche Stratification - Experimental Tests of the “Metastable Wedge” and “Continuous Flow” Models

Published online by Cambridge University Press:  01 February 2011

M. E. Swanson
Affiliation:
The University of Minnesota, School of Physics and Astronomy, Minneapolis, MN 55455
M. Landreman
Affiliation:
The University of Minnesota, School of Physics and Astronomy, Minneapolis, MN 55455
J. Michel
Affiliation:
The University of Minnesota, School of Physics and Astronomy, Minneapolis, MN 55455
J. Kakalios
Affiliation:
The University of Minnesota, School of Physics and Astronomy, Minneapolis, MN 55455
Get access

Abstract

When an initially homogeneous binary mixture of granular media such as fine and coarse sand is poured near the closed edge of a “quasi-two-dimensional” Hele-Shaw cell consisting of two vertical transparent plates held a narrow distance apart, the mixture spontaneously forms alternating segregated layers. Experimental measurements of this stratification effect are reported in order to determine which model, one which suggests that segregation only occurs when the granular material contained within a metastable heap between the critical and maximum angle of repose avalanches down the free surface, or one for which the segregation results from smaller particles becoming trapped in the top surface and being removed from the moving layer during continuous flow. The result reported here indicate that the Metastable Wedge model provides a natural explanation for the initial mixed zone which precedes the formation of the layers, while the Continuous Flow model explains the observed upward moving kink of segregated material for higher granular flux rates, and that both mechansims are necessary in order to understand the observed pairing of segregated layersfor intermediate flow rates and cell separations.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable