Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-16T07:22:02.635Z Has data issue: false hasContentIssue false

Barium Strontium Titanate Ceramics Prepared by a Reaction-Sintering Process

Published online by Cambridge University Press:  01 February 2011

Yi-Cheng Liou
Affiliation:
Department of Electronic Engineering, Kun-Shan University of Technology, Tainan Hsien 710, Taiwan, R.O.C.
Jen-Hsien Chen
Affiliation:
Department of Electronic Engineering, Kun-Shan University of Technology, Tainan Hsien 710, Taiwan, R.O.C.
Chi-Ting Wu
Affiliation:
Department of Electronic Engineering, Kun-Shan University of Technology, Tainan Hsien 710, Taiwan, R.O.C.
Get access

Abstract

Barium strontium titanate (Ba0.7Sr0.3TiO3, BST) ceramics prepared by a reaction-sintering process were investigated. The mixture of raw materials of stoichiometric Ba0.7Sr0.3TiO3 was pressed and sintered into ceramics without any calcination stage involved. Perovskite BST ceramics were obtained after sintered at 1330–1370°C for 2–6 h. For 6 h soak time, a density value 5.68g/cm3 (99.8% of the theoretic value) was obtained at 1350°C sintering. Grains of sizes between 2μm and 15μm were formed after 1330–1370°C sintering for 2–6 h. A diffused ferroelectric-paraelectric transition was observed in pellets sintered at 1330°C for 2 h and disappeared at a longer soak time or a higher sintering temperature.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable