Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T07:09:22.014Z Has data issue: false hasContentIssue false

Blue Light Electroluminescence From Doped μc-SiC prepared by Excimer (ArF) Laser Crystallisation

Published online by Cambridge University Press:  21 February 2011

S. P. Lau
Affiliation:
Department of Materials Engineering, University College of Swansea, Singleton Park, Swansea, SA2 8PP, United Kingdom.
J. M. Marshall
Affiliation:
Department of Materials Engineering, University College of Swansea, Singleton Park, Swansea, SA2 8PP, United Kingdom.
T. E. Dyer
Affiliation:
Department of Materials Engineering, University College of Swansea, Singleton Park, Swansea, SA2 8PP, United Kingdom.
A. R. Hepburn
Affiliation:
Department of Materials Engineering, University College of Swansea, Singleton Park, Swansea, SA2 8PP, United Kingdom.
J. F. DaVies
Affiliation:
Department of Materials Engineering, University College of Swansea, Singleton Park, Swansea, SA2 8PP, United Kingdom.
Get access

Abstract

A novel method has been developed to prepare highly conductive and wide band gap doped (B2H6/PH3) microcrystalline silicon carbide (μ-SiC) by excimer (ArF) laser crystallisation. Doped a-SiC:H films were prepared by Plasma Enhanced Chemical Vapour Deposition (PECVD), both with and without H2 dilution. After crystallisation, this material has Taue gap of around 2.0 eV and exhibits a dark conductivity as high as 20 (Ωcm)-1, more than ten orders of magnitude higher than before the laser irradiation. This is shown to be mainly due to the formation of SiC microcrystallites in the laser crystallised a-SiC:H.

In this paper, we report that this material can be utilised not only as the carrier injection layer in a-SiC:H based Thin Film Light Emitting Diodes (TFLEDs) but also as a luminescent layer. Blue light emission has been observed from a laser crystallised (LC) doped μc-SiC based electroluminescent device, the peak wavelength is around 490nm.

The simplicity of excimer (ArF) laser crystallisation and its capability to fabricate poly-Si TFTs, makes this a promising novel method to realise fully integrated Si large area multi-colour displays.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable