Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T18:10:33.930Z Has data issue: false hasContentIssue false

Blue/White Emission from Hydrogenated Amorphous Silicon Carbide Films Prepared by PECVD

Published online by Cambridge University Press:  31 January 2011

Volodymyr Ivashchenko
Affiliation:
ivash@materials.kiev.ua, Institute of problems of Material Science, NAS of Ukraine, Material Science of Refractory Compounds, Krzhyzhanovsky str. 3, Kyiv, 03142, Ukraine, +380-44-42422540, +380-44-4242131
Andrey Vasin
Affiliation:
av966@yahoo.com, Institute of Semiconductor Physics, NAS oF Ukraine, Kyiv, Ukraine
L. A. Ivashchenko
Affiliation:
IvashchenkoLA@FAKEEMAIL.COM, Institute for Problems of Material Science, NAS of Ukraine, Kyiv, Ukraine
P. L. Skrynskyy
Affiliation:
Skrynskyy@fakeemila.com, Institute for Problems of Material Science, NAS of Ukraine, Kyiv, Ukraine
Get access

Abstract

Photoluminescence (PL) from hydrogenated silicon carbide (SiC:H) films is studied at room temperature. The films were deposited by plasma-enhanced chemical vapor (PECVD) technique with and without substrate bias using methyltrichlorosilane as a main precursor. After the deposition the samples were annealed at various temperatures in vacuum. The films were characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD). The samples deposited without substrate bias (series A) were amorphous, whereas the samples deposited with negative substrate bias -100V (series B) were nanocrystalline. The one-peak (470 nm) and double-peak (415 and 437 nm) PL structures of the as-deposited samples A and B were observed, respectively. Annealing strongly enhanced intensity of PL of the samples B and trandformed PL spectrum from double-peak into broad featureless band with intensity at about 470 nm. The blue PL in as-deposited films B is supposed to be assigned to the radiative recombination in the sites located at the nanocrystallite surface, whereas the photo excitation of carries mostly occurs in nanocrystallite cores. A further increase in annealing temperature causes hydrogen effusion, which leads to an increase of the concentration of non-raidative recombination centers associated with dangling-bonds and as a result, to the quenching of PL.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable