Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T15:51:58.309Z Has data issue: false hasContentIssue false

Broad Beam Ultrahigh Current Density Ion Implantation

Published online by Cambridge University Press:  25 February 2011

W. S. Sampath
Affiliation:
Dept. of Mech. Eng., Colorado State University, Fort Collins, CO 80523
P. J. Wilbur
Affiliation:
Dept. of Mech. Eng., Colorado State University, Fort Collins, CO 80523
Get access

Abstract

In order to achieve low cost rapid surface modification of mechanical components a broad beam (10 cm. dia.), ultrahigh current density (up to 1500 μA/cm2) ion implanter has been developed at Colorado State University. The characteristics of ultrahigh current density ion implantation are compared to those of conventional ion implantation and the relative advantages of the ultrahigh current density implantation are identified. The temperature rise that typical implanted surfaces experience during implantation at various current densities are measured and compared with numerical heat transfer calculations. It is shown that even though the temperature rise can be high at ultrahigh current density implantation conditions, the times at temperature are sufficiently short (typically, 11 sec.) so that no significant tempering, annealing or other diffusion based transformations in the bulk material (i.e. beneath the implanted layer) are induced. The microstructure and hardness beneath the implanted layer are compared before and after ultrahigh current density ion implantation. The results on 1018 martensitic steel, 440C martensitic steel, 52100 martensitic steel, 304 stainless steel, Ti-6A1–4V and 2024-T3 aluminum are presented. The substantial advantage of much deeper (fourfold) ion penetration observed with ultrahigh current density implantation is identified. It is suggested that this increased depth of penetration is due to the phenomenon of radiation enhanced diffusion.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable