Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T04:51:59.366Z Has data issue: false hasContentIssue false

Bulk Effective Moduli: Their Calculation and Usage for Describing Physical Properties of Composite Media

Published online by Cambridge University Press:  28 February 2011

David J. Bergman*
Affiliation:
Raymond and Beverly Sackler Faculty of Exact Sciences, School of Physics and Astronomy, Tel Aviv University, Tel Aviv 69978, Israel
Get access

Abstract

While not telling the whole story, the representation of a composite medium by a homogeneous effective medium is often an excellent approximation for describing its macroscopic physical properties. Modern methods for calculating the effective medium properties are reviewed with special emphasis on understanding both successes and limitations. Outstanding problems that can and should be tackled are identified. The successes include calculations of the electrical conductivity, dielectric coefficient, and elastic stiffness moduli of composites with a periodic microstructure, and the simulation of those properties for disordered composites near a percolation threshold by means of discrete models such as a random-resistor-network. For composites where the microstructure is either unknown or very complicated, a whole class of exact bounds have been found for these properties based on various types of limited information. Recently, advances have been made in calculating the weak field magneto-transport and the thermoelectric behavior of two-component composites, and also some types of nonlinear properties. An important challenge remains the calculation of magneto-transport at high magnetic fields. Another is the theoretical treatment of multicomponent composites. A third is to find relations between different effective properties of a composite that can enable us to learn about property A by measuring a different property B. This is especially important when the measurement of A would destroy the sample, as when A is the yield stress, whereas the measurement of B is nondestructive, as when B is a small, nonlinear correction to the usual elastic stiffness moduli.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable