Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-17T21:22:58.707Z Has data issue: false hasContentIssue false

Calculated Vs Measured Viscosities of Sol-Gel Processed Silica

Published online by Cambridge University Press:  28 February 2011

T. A. Gallo
Affiliation:
Rutgers - The State University of New Jersey, Ceramics Department, P.O. Box 909, Piscataway, N.J. 08854
L. C. Klein
Affiliation:
Rutgers - The State University of New Jersey, Ceramics Department, P.O. Box 909, Piscataway, N.J. 08854
Get access

Abstract

The densification of sol-gel processed silica was studied by comparing calculated and measured viscosities between 700 and 850°C. Linear shrinkage was measured in a dilatometer. From shrinkage data, relative bulk densities were determined. The densities were used in a model for viscous sintering to calculate viscosities. Beam-bending viscosimetry was used to determine viscosities directly. The deflection rate of a centrally loaded beam was measured. Both the calculated and measured viscosities had the same time dependence. The temperature dependence was also determined.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable