Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T10:13:01.198Z Has data issue: false hasContentIssue false

Carbon and Oxide Coatings on Continuous Ceramic Fibers

Published online by Cambridge University Press:  15 February 2011

R. S. Hay
Affiliation:
Wright Lab, Materials Directorate, WPAFB, Dayton, OH
M. D. Petry
Affiliation:
UES, INC, Dayton, OH
K. A. Keller
Affiliation:
UES, INC, Dayton, OH
M. K. Cinibulk
Affiliation:
Wright Lab, Materials Directorate, WPAFB, Dayton, OH
J. R. Welch
Affiliation:
Wright State University, Dayton, OH
Get access

Abstract

Oxide - carbon multilayer coatings were continuously applied to various fibers of nominal SiC composition. A liquid-phase coating system that allows application of the coatings in a controlled atmosphere at relatively rapid rates was employed. Sugar - ammonium hydroxide solutions were used for carbon coatings, and aqueous sols were used for the oxides. Carbon was also deposited simultaneously with alumina by chemical vapor deposition of a hydrocarbon in the coating furnace. The coatings were extensively characterized by optical microscopy and TEM. Problems with embrittlement by oxide coatings and poor adherence of oxide coatings on carbon, and some possible solutions to these problems, are discussed.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable