Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T03:59:28.956Z Has data issue: false hasContentIssue false

Cavitation in Unfired Ceramic Sheets by Pulsed Nd:YAG Laser

Published online by Cambridge University Press:  26 February 2011

Rong-Fuh Louh
Affiliation:
Department of Materials Science and Engineering University of Illinois at Urbana-Champaign, Urbana, IL 61801
Relva C. Buchanan
Affiliation:
Department of Materials Science and Engineering University of Illinois at Urbana-Champaign, Urbana, IL 61801
Get access

Abstract

Single shot pulses from a Nd:YAG laser were used to generate different sized holes and patterns in tape-cast ceramic sheets for electronic packaging applications. The ceramic sheets were based on formulations in the BaTiO3 and MgO-Al2O3-SiO2 systems. The single shot laser pulses were targeted using a computer controlled mirror deflection system and a programmed (cavitation) pattern which could readily be modified. Morphology and structure of the drilled holes before and after sintering were examined by SEM. The surface radial temperature profile resulting from the laser pulse was directly mapped using a lacquer thermocoat. Effects of the laser pulse energy and beam spot size on laser/ceramic interactions and cavitation process were also explored.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable