Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T11:54:10.164Z Has data issue: false hasContentIssue false

CFD Modeling of Laser Guided Deposition for Direct Write Fabrication

Published online by Cambridge University Press:  10 February 2011

J. C. Sheu
Affiliation:
CFD Research Corporation, 215 Wynn Drive, Huntsville, AL 35805, USA, jcs@cfdrc.com
M. G. Giridharan
Affiliation:
CFD Research Corporation, 215 Wynn Drive, Huntsville, AL 35805, USA, mgg@cfdrc.com
S. Lowry
Affiliation:
CFD Research Corporation, 215 Wynn Drive, Huntsville, AL 35805, USA
Get access

Abstract

A computational model for simulating laser-guided particle deposition process is described. This model solves for the transport of gas and particle phases in a fully coupled manner. The optical forces on the particles are evaluated from Mie theory based on local laser intensity. Simulations were performed for different operating conditions of laser power, ambient pressure, and substrate traverse speed. Simulations revealed potential problems such as particle deflected away from substrate due to ambient air current disturbances, substrate overheating, and optical fiber clogging. Possible solutions for these problems are discussed

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable