Hostname: page-component-7b7567c8c-8rbv8 Total loading time: 0 Render date: 2026-11-18T11:20:35.672Z Has data issue: false hasContentIssue false

Characterization of Al and Al-Cr-Al Thin Films

Published online by Cambridge University Press:  26 February 2011

O. F. De Lima
Affiliation:
Argonne National Laboratory, MSD-223, 9700 S. Cass Ave., Argonne, IL 60439
Y. Lepetre
Affiliation:
Argonne National Laboratory, MSD-223, 9700 S. Cass Ave., Argonne, IL 60439
M. B. Brodsky
Affiliation:
Argonne National Laboratory, MSD-223, 9700 S. Cass Ave., Argonne, IL 60439
Get access

Abstract

TEM, X-ray diffraction, and electrical resistivity measurements were used to study the microstructure and the growth of AI-Cr-AI film sandwiches, where the individual Al layers were 300 Å thick and the Cr thickness was varied between 0–10 atomic layers. The base vacuum was around 1.0 × 10−10 torr, substrate temperatures varied between 100–350 °C, and evaporation rates were 3Å/s for Al and ∼0.1 – 0.2 Å/s for Cr. All Al films had a strong (111) texture and showed a non-percolative island structure at 350 °C. The films became connected at lower substrate temperatures, reaching perfect continuity at 100°C. However, electrical conductivity is achieved also for the films deposited at 350 °C when one or more atomic layers of Cr are sandwiched between the Al layers. Results for the superconducting critical temperature and resistivity are discussed in terms of Cr diffusion into Al and the film size effect.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable