Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-16T18:24:11.980Z Has data issue: false hasContentIssue false

Characterization of LPCVD of Silicon Nitride in a Rapid Thermal Processor

Published online by Cambridge University Press:  25 February 2011

F. Scott Johnson
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
Roderick M. Miller
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
Mehmet C. Öztüirk
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
Jimmie J. Wortman
Affiliation:
North Carolina State University, Department of Electrical and Computer Engineering Box 7911, Raleigh, NC 27695-7911
Get access

Abstract

Low pressure chemical vapor deposition of silicon nitride has been studied using a cold-walled, lamp heated, rapid thermal processor. Films were deposited at low presure using both silane and dichlorosilane, diluted in hydrogen and argon carrier gasses. The dichlorosilane and ammonia reaction was found to be unsuitable for use in the cold-walled system. Rapid thermal chemical vapor depositions using silane and ammonia did not result in “bullseye” non-uniformities reported for low presure depositions in conventional hot-walled tube furnaces. Ammonia to silane ratios of 120:1 were found to result in stoichiometric silicon nitride films. Deposition rates are well suited for dielectricapplications. Electrical characteristics are comparable to those of films deposited using APCVD and LPCVD methods.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable