Hostname: page-component-7b7567c8c-kwt9d Total loading time: 0 Render date: 2026-11-15T05:19:57.797Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Polyimide Thin Films on Metals

Published online by Cambridge University Press:  15 February 2011

Jiong-Ping Lu,
Pradnya V. Nagarkar,
David Volfson,
Klavs F. Jensen and
Stephen D. Senturia
Jiong-Ping Lu
Affiliation:
Electronics Packaging Program and Departments of Chemical, Electrical, and Materials Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Pradnya V. Nagarkar
Affiliation:
Electronics Packaging Program and Departments of Chemical, Electrical, and Materials Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
David Volfson
Affiliation:
Electronics Packaging Program and Departments of Chemical, Electrical, and Materials Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Klavs F. Jensen
Affiliation:
Electronics Packaging Program and Departments of Chemical, Electrical, and Materials Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Stephen D. Senturia
Affiliation:
Electronics Packaging Program and Departments of Chemical, Electrical, and Materials Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139
Get access

Abstract

We describe an approach using thin films on metals as models to study interfacial interactions. Thin films of biphenyl-tetracarboxylic dianhydride (BPDA) - p-phenylene diamine (PPD) based polyimide on Cr and Au surfaces have been investigated using infrared reflection absorption spectroscopy (IRRAS) and x-ray photoelectron spectroscopy (XPS). IRRAS was used for in-situ monitoring of polymer curing processes. Cured polyimide thin films on metals were characterized ex-situ by both XPS and IRRAS. Anhydride was observed to be an intermediate during chemical transformation of polyamic acid to polyimide. Imidization processes were found to be completed after curing at 250°C for thin films. Strong chemical modification of polyimide thin films resulting from interaction with Cr substrates were observed by infrared spectroscopy. These observations were consistent with angle-resolved XPS data showing a different C 1s emission spectrum of polyimide-Cr interfacial region, compared to the polyimide spectrum.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 264: Symposium G – Electronic Packaging Materials Science VI , 1992, 199
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Senturia, S.D., in Polymers for Microelectronics, edited by Tabata, Y., Mita, I., Nonogaki, S., Horie, K. and Tagawa, S., (Kodansha, Tokyo, 1990) pp. 637.Google Scholar
2. Ho, P.S., Silverman, B.D., Haight, R.A., White, R.C., Sanda, P.N. and Rossi, A.R., IBM J. Res. Develop. 32, 658 (1988).Google Scholar
3. Stewart, W.C., Leu, J. and Jensen, K.F., in Interfaces Between Polymers, Metals and Ceramics, edited by DeKoven, B.M., Gellman, A.J. and Rosenberg, R. (Mater. Res. Soc. Proc. 153, Pittsburgh, PA, 1989) p. 285.Google Scholar
4. Kim, Y.-H., Kim, J., Walker, G.F., Feger, C. and Kowalczyk, S.P., J. Adhesion Sci. Tech. 2, 95 (1988)Google Scholar
5. Chou, N.J. and Tang, C.H., J. Vac. Sci. Tech. A 2, 751 (1984).Google Scholar
6. Goldberg, M.J., Clabes, J.G. and Kovac, C.A., J. Vac. Sci. Tech. A 6, 991 (1988).Google Scholar
7. Pryde, C.A., Soc. Plast. Eng. ANTEC ‘90 439 (1990).Google Scholar
8. Snyder, R.W., in Polyimides: Materials, Chemistry and Characterization, edited by Feger, C., Khojasteh, M.M. and McGrath, J.E., (Elsevier, Amsterdam, 1989) p. 363.Google Scholar
9. Colthup, N.B., Day, L.H. and Wiberley, S.E., Introduction to Infrared and Raman Spectroscopy, 3rd ed, (Academic Press, Boston, 1990).Google Scholar
10. Pryde, C.A., J. Polym. Sci. Part A: Polym. Chem. 27, 711 (1989).Google Scholar
11. Ishida, H., Wellinghoff, S.T., Baer, E. and Koenig, J.L., Macromolecules, 13, 826 (1980).Google Scholar
12. Subramanian, R., Pottiger, M.T., Morris, J.H. and Curilla, J.P., in Materials Science of High Temperature Polymers for Microelectronics, edited by Grubb, D.T., Mita, I. and Yoon, D.Y. (Mater. Res. Soc. Proc. 227, Pittsburgh, PA, 1991) p. 147.Google Scholar