Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-13T09:56:11.641Z Has data issue: false hasContentIssue false
  • English
  • Français

Charge Controlled Silicon Carbide Switching Devices

Published online by Cambridge University Press:  15 March 2011

Peter Friedrichs
Peter Friedrichs*
Affiliation:
SiCED Electronics Development GmbH & Co. KG, a Siemens Company Paul-Gossen-Str. 100, D-91052 Erlangen, http://www.siced.de
Get access

Abstract

Charge controlled power switching devices fabricated in 4H-Silicon Carbide are discussed in this paper. After comparing possible structures, results on prototype devices are presented. The presentation will give an overview about the developments of SiC power switches at SiCED, in addition some potential applications serving as an accelerator for the SiC power switch development will be sketched. The performance of vertical JFETs will be analyzed in detail. These can be operated as a single device as well as in combination with a low voltage silicon power MOSFET. The result of the hybrid assembly is a normally off device which behaves for the user more and more like a classical MOSFET with respect to the input as well as the output characteristic. Several improvements where performed which make the device more attractive for the customer. It will be shown which factors drive these optimization and how they can be implemented. Although the primary target for this device is the >1000V blocking voltage range, it will be discussed how the huge 600V power switch market can be made accessible for SiC power devices too. Intensively the high temperature performance of SiC JFETs and Si/SiC cascodes is discussed. Additionally, other developments like silicon power MOSFETs or high voltage switches will be mentioned.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 815 , 2004, J3.1
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. please refer to http://www.infineon.com/cgi/ecrm.dll/ecrm/scripts/prod_cat.jsp?oid=-8681 and http://www.cree.com/Products/pwr_index.asp Google Scholar
2. Lorenz, L., Marz, M., A.Knapp and Zverev, I., “Matched pair of COOLMOS Transistor with SiC Schottky diode advantages in applications”, in IEEE IASConf. Rec. 2000, pp376–383 Google Scholar
3. Lidow, Alex, in Power Electronics Europe, Issue 2/2003, pp44–45 Google Scholar
4. Friedrichs, P., Mitlehner, H., Schorner, R., Dohnke, K., Elpelt, R. and Stephani, D., “The vertical silicon carbide JFET - a fast and low loss solid state power switching device”, Proceedings of the EPE 2001, in Graz, Austria, August 2001, CD publication ISBN:90-75815-06-9Google Scholar
5. Friedrichs, P., Mitlehner, H., Schorner, R., Dohnke, K.O., Elpelt, R., and Stephani, D., “High voltage, modular switch based on SiC VJFETs - first results for a fast 4.5kV/1.2ω configuration”, Materials Science Forum, Vol. 433–436 (2003), pp.793–796 Google Scholar
6. Mitlehner, H., Friedrichs, P., Schorner, R., Dohnke, K.O., Elpelt, R., and Stephani, D., “BIFET - a novel bipolar switch for high voltage electronics”, presented at the ICSCRM2003 in Lyon, October 2003, proceedings in pressGoogle Scholar
7. Vispute, R.D. et al. , “Pulsed Laser Deposition : A novel growth technique for wide bandgap semiconductor research”, Materials Science Forum, Vol. 338–342 (2000), pp.1503–1506 Google Scholar
8. Issue Surface and Interfaces, Materials Science Forum, Vol. 433–436 (2003), pp.535–604 Google Scholar
9. Ryu, S.H, Agarwal, A., Richmond, J, and Palmour, J., “Development of 10kV 4H-SiC Power DMOSFETs”, presented at the ICSCRM2003 in Lyon, October 2003, proceedings in pressGoogle Scholar
10. Hann, E., Chang, H.R., Radun, A.V., Zhang, Q., Gomez, M., Li, X. and Bui, C., “Static and dynamic characterization of 20A, 600V SiC MOS-Enhanced JFET, presented at the ICSCRM2003 in Lyon, October 2003, proceedings in pressGoogle Scholar
11. , M-Matin, Saha, A., and Cooper, J.A. Jr., “Self aligned short channel vertical power DMOSFETs in 4H-SiC”, presented at the ICSCRM2003 in Lyon, October 2003 Google Scholar
12. Cheong, K., Dimitriev, S. and Han, J., “Effects of initial nitridation on the characteristics of SiC-SiO2 interfaces”, Materials Science Forum, Vol. 433–436 (2003), pp.583–586 Google Scholar
13. Sugawara, Y., “Recent progress in SiC power device developments and application studies”, Proceedings of the ISPSD 2003, ISBN: 0-7803-7877-6Google Scholar
14. Zhao, J.H. et al. , various papers presented at the ICSCRM2003 in Lyon, October 2003, proceedings in pressGoogle Scholar
15. http://www.fairchildsemi.com/apnotes/an_byfam_d9.html, please refer to the AN-7502Google Scholar
16. Siergiej, R.R.; Clarke, R.C.; Aganval, A.K.; Brandt, C.D.; Burk, A.A. Jr., “High power 4H-SiC static induction transistors”, International Electron Devices Meeting. Technical Digest, 1995, pp.353–356 Google Scholar
17. Peters, D., Mitlehner, H., Schorner, R., Elpelt, R., and Stephani, D., “State of the art and technological challenges of SiC power MOSFETs designed for high blocking voltages”, presented at the EPE 2003 in Toulouse, ISBN 90-75815-07-7Google Scholar
18. Friedrichs, P., Mitlehner, H., Schorner, R., Elpelt, R., and Stephani, D., “Optimization of Vertical Silicon Carbide Field Effect Transistors towards a cost attractive SiC Power Switch”, presented at the ICSCRM2003 in Lyon, October 2003, proceedings in pressGoogle Scholar
19. Kolar, J.W. et al. , “A gate drive circuit for silicon carbide JFET”, presented at the IECON November 2003, proceedings in pressGoogle Scholar
20. Schierling, H., Reberreh, C., Braun, M., “First Inverter using silicon carbide power switches only”, presented at the EPE 2003 in Toulouse, ISBN 90-75815-07-7Google Scholar