Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T07:43:58.212Z Has data issue: false hasContentIssue false

Chemical and Physical Principles of Processing that affect Microstructure of Al2O3-ZrO2 Composites

Published online by Cambridge University Press:  25 February 2011

Alan Bleier
Affiliation:
Oak Ridge National Laboratory, Metals and Ceramics Division, P. 0. Box 2008, Oak Ridge, TN 37831–6068
Gary Westmoreland
Affiliation:
Oak Ridge National Laboratory, Metals and Ceramics Division, P. 0. Box 2008, Oak Ridge, TN 37831–6068
Get access

Abstract

Aqueous processing of 1- to 20-% v/v binary suspensions containing 0.50-μm α-Al2O3 and 0.71-μm m-ZrO2 was investigated in the presence and absence of AlCl3 from pH 2 to 12 using sedimentation, rheological, electrokinetic, and potentiometric techniques. Differential sedimentation of the oxide particulates leads to a nonuniform distribution of ZrO2 when colloidally stable slurries are used. However, processing under conditions that promote weak association of the oxides improves uniformity, with optimal conditions in the absence of AlCl3 being in the pH range 5 to 6. Thus, prefired microstructure depends on the pH at which processing occurs, behavior derived from the different, pH-dependent surface properties of the oxides. Pre-exposure of m-ZrO2 to AlCl3 in the pH range of 4 to 8 alters the final composite microstructure via adsorption of Al-species and renders the two solids more similar electrostatically, thereby reducing the forces responsible for the weak association and uniform distribution.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable