Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Luke, K.
and
Glasser, F.P.
1987.
Proceedings of the Fourth International Conference on Durability of Building Materials and Components.
p.
188.
Xu, Aimin
and
Sarkar, Shondeep L.
1994.
Microstructural Development in High‐Volume Fly‐Ash Cement System.
Journal of Materials in Civil Engineering,
Vol. 6,
Issue. 1,
p.
117.
Maltais, Y.
and
Marchand, J.
1997.
INFLUENCE OF CURING TEMPERATURE ON CEMENT HYDRATION AND MECHANICAL STRENGTH DEVELOPMENT OF FLY ASH MORTARS.
Cement and Concrete Research,
Vol. 27,
Issue. 7,
p.
1009.
Luke, Karen
and
Lachowski, Eric
2008.
Internal Composition of 20‐Year‐Old Fly Ash and Slag‐Blended Ordinary Portland Cement Pastes.
Journal of the American Ceramic Society,
Vol. 91,
Issue. 12,
p.
4084.
Vollpracht, Anya
Lothenbach, Barbara
Snellings, Ruben
and
Haufe, Johannes
2016.
The pore solution of blended cements: a review.
Materials and Structures,
Vol. 49,
Issue. 8,
p.
3341.
2016.
Phase Evolution of Oil Well Cements with Nano-Additive at Elevated Temperature/Pressure.
ACI Materials Journal,
Vol. 113,
Issue. 5,
Nickl, Simon
Collin, Marie
Olea, Benjamin
Kraus, Alexander
Schwesig, Peter
Sachsenhauser, Bernhard
and
Gädt, Torben
2026.
Investigating the evolution of the cementitious pore solution during the first 15 Minutes of hydration via dynamic crossflow filtration.
CEMENT,
Vol. 24,
Issue. ,
p.
100181.
