Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-17T19:17:39.851Z Has data issue: false hasContentIssue false

Cl2 Plasma Etching of Si(100): Surface Chemistry and Damage

Published online by Cambridge University Press:  03 September 2012

N. Layadi
Affiliation:
Bell Laboratories, Lucent Technologies, 700 Mountain Avenue, Murray Hill, NJ 07974, USA.
V. M. Donnelly
Affiliation:
Bell Laboratories, Lucent Technologies, 700 Mountain Avenue, Murray Hill, NJ 07974, USA.
J. T. C. Lee
Affiliation:
Bell Laboratories, Lucent Technologies, 700 Mountain Avenue, Murray Hill, NJ 07974, USA.
Get access

Abstract

The interaction of a Cl2 plasma with a Si(100) surface has been investigated by angle resolved x-ray photoelectron spectroscopy (XPS) and spectroscopic ellipsometry. From XPS, it was found that the amount of chlorine incorporated at the Si surface increases with ion energy. Chlorine is present as SiClx (x = 1-3) with average relative coverages (integrated over depth) of [SiCl]:[SiCl2]:[SiCl3] ≅ 1:0.33:0.1. These relative coverages don’t depend strongly on ion energy between 40 and 280 eV. Real-time spectroscopic ellipsometry measurements showed that the layer present during etching is stable when the plasma is extinguished and the gas pumped away. In addition, the equivalent thickness of damaged silicon and silicon-chloride within the surface layer increases with ion energy.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable