Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-17T01:50:44.026Z Has data issue: false hasContentIssue false

A Comparative Study on the Influence of Nb and Ti Additions to Different Processed Atomized Nial Powders.

Published online by Cambridge University Press:  26 February 2011

Rainhard Laag
Affiliation:
Max-Planck-Institut für Metallforschung, Pulvermetallurgisches Laboratorium, Heisenbergstraβe 5, D-7000 Stuttgart 80, Germany.
Wolfgang A. Kaysser
Affiliation:
Max-Planck-Institut für Metallforschung, Pulvermetallurgisches Laboratorium, Heisenbergstraβe 5, D-7000 Stuttgart 80, Germany.
GÜnter Petzow
Affiliation:
Max-Planck-Institut für Metallforschung, Pulvermetallurgisches Laboratorium, Heisenbergstraβe 5, D-7000 Stuttgart 80, Germany.
Get access

Abstract

Prealloyed powders of NiAl, NiAl-5Ti, NiAl-5Nb and NiAl-5Ti-5Nb (at.%) were gas atomized with an average particle size of 90 μm and cooling rates of > 104 K/s. The powders were attritor milled under Ar atmosphere reducing the average particle size to 1.5 μm. Sintering CIP compacts developed microstructure and density distributions, which allowed subsequent containerless HIPing to near full density (>98.5%) and a final grain size < 8 μm. Alloying of NiAl with 5at.% Nb or Ti increased its hardness, Young's modulus, toughness and creep resistance. The room temperature fracture path changed from primarily intergranular (NiAl) to primarily transgranular (Nb, Ti alloyed), increasing the Klc, values from 3.8 to 14.4 and 15.3 MPa√m, respectively. For comparison, HIPed materials from the as-atomized powders were also tested.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable