Hostname: page-component-7b7567c8c-x9q2v Total loading time: 0.001 Render date: 2026-11-18T10:24:10.270Z Has data issue: false hasContentIssue false

Comparing Biocompatibility of Nanocrystalline Titanium and Titanium-Oxide with Microcrystalline Titanium

Published online by Cambridge University Press:  15 July 2013

Raheleh Miralami
Affiliation:
Department of Orthopaedic Surgery and Rehabilitation, UNMC, Omaha, NE
Laura Koepsell
Affiliation:
Department of Orthopaedic Surgery and Rehabilitation, UNMC, Omaha, NE
Thyagaseely Premaraj
Affiliation:
Department of Growth & Development -, University of Nebraska-Lincoln, Lincoln, NE
Bongok Kim
Affiliation:
Department of Adult Restorative Dentistry, University of Nebraska - Lincoln, Lincoln, NE
Geoffrey M. Thiele
Affiliation:
Department of Internal Medicine – Rheumatology, UNMC, Omaha, NE
J. Graham Sharp
Affiliation:
Department of Genetics, Cell Biology & Anatomy, UNMC, Omaha, NE
Kevin L. Garvin
Affiliation:
Department of Orthopaedic Surgery and Rehabilitation, UNMC, Omaha, NE
Fereydoon Namavar*
Affiliation:
Department of Orthopaedic Surgery and Rehabilitation, UNMC, Omaha, NE
*
*Corresponding Author fnamavar@unmc.edu
Get access

Abstract

Titanium (Ti) is the material of choice for orthopaedic applications because it is biocompatible and encourages osteoblast ingrowth. It was shown that the biocompatibility of Ti metal is due to the presence of a thin native sub-stoichiometric titanium oxide layer which enhances the adsorption of mediating proteins on the surface [1]. The present studies were devised to evaluate the adhesion, survival, and growth of cells on the surface of new engineered nano-crystal films of titanium and titanium oxides and compare them with orthopaedic-grade titanium with microcrystals. The engineered nano-crystal films with hydrophilic properties are produced by employing an ion beam assisted deposition (IBAD) technique. IBAD combines physical vapor deposition with concurrent ion beam bombardment in a high vacuum environment to produce films (with 3 to 70 nm grain size) with superior properties. These films are “stitched” to the artificial orthopaedic implant materials with characteristics that affect the wettability and mechanical properties of the coatings.

To characterize the biocompatibility of these nano-engineered surfaces, we have studied osteoblast function including cell adhesion, growth, and differentiation on different nanostructured samples. Cell responses to surfaces were examined using SAOS-2 osteoblast-like cells. We also studied a correlation between the surface nanostructures and the cell growth by characterizing the SAOS-2 cells with immunofluorescence and measuring the amount alizarin red concentration produced after 7 and 14 days. The number of adherent cells was determined by means of nuclei quantification on the nanocrystalline Ti, TiO2, and microcrystalline Ti and analysis was performed with Image J. Our experimental results indicated that nanocrystalline TiO2 is superior to both nano and microcrystalline Ti in supporting growth, adhesion, and proliferation. Improving the quality of surface oxide, i.e. fabricating stoichiometric oxides as well as nanoengineering the surface topology, is crucial for increasing the biocompatibility of Ti implant materials.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable