Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T14:25:38.578Z Has data issue: false hasContentIssue false

Comparison Between Al- and B-Doped Zno Window Layers For CuInSe2Thin Film Solar Cells

Published online by Cambridge University Press:  10 February 2011

T. Nakada
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Setagaya-ku, Tokyo 157, Japan
N. Murakami
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Setagaya-ku, Tokyo 157, Japan
A. Kunioka
Affiliation:
Department of Electrical Engineering and Electronics, Aoyama Gakuin University, Setagaya-ku, Tokyo 157, Japan
Get access

Abstract

A comparative study of several properties of ZnO:Al and ZnO:B films grown by magnetron sputtering has been performed. The influence of these window layers on device performance has also been investigated. Sputter-deposited ZnO:B films were used for the first time as a window material of CIS thin film solar cells. The short circuit current was improved by replacing ZnO:Al with ZnO:B window layers. A discussion of the issues relating to ZnO window layers for improving cell performance is presented.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable