Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-17T17:36:43.236Z Has data issue: false hasContentIssue false

Comparison between Thermal and Laser Annealing in Ion-Implanted Silicon.

Published online by Cambridge University Press:  15 February 2011

A. Blosse
Affiliation:
Laboratoire de Physique des Solides, I.S.E.N., 3 rue F. Baes, 59046 Lille, France
J.C. Bourgoin
Affiliation:
Centro de InvestigaciÓn y de Estudios Avanzados del IPN. Apartado Postal 14–740, 07000 México, D. F.
Get access

Abstract

N-type, 1015 −1016 cm−3 doped, Fz, Silicon has been implanted with 1 to 4 × 1012 cm−2, 100 or 300 keV, As ions. The nature and concentration of the defects has been monitored using Deep Level transient Spectroscopy as a function of the thermal treatment (in the range 500–900°C) and of the energy of the pulse (15 ns) of a ruby (0.69,μm) laser (in the range 0.3 to 0.6 J cm−2). The defects resulting from annealing by the two treatments are found to be the same. Only, for energies higher than 0.5 J cm−2, the laser treatment introduced new defects (at Ec−0. 32 eV), presumably resulting from a quenching process. Thus a laser energy below the theshold for melting and epitaxial recrystallization is able to anneal the defects produced by implantation, demonstrating that the annealing process induced by the laser pulse is not a purely thermal process but probably involves an ionization enhanced mechanism.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable