Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T06:08:27.742Z Has data issue: false hasContentIssue false

Continuous Casting of Particulate Silica Gels

Published online by Cambridge University Press:  21 February 2011

E. M. Rabinovich
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
K. A. Jackson
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
Nonna A. Kopylov
Affiliation:
AT&T Bell Laboratories, Murray Hill, New Jersey 07974
Get access

Abstract

A feasibility study of continuous casting of particulate silica sols has been conducted. The process consists in measured pumping of the sol and a gelling agent into a heated mold where the sol gels. The gel is continuously pushed out of the cylindrical mold by the pressure of the pumped sol. Gel rods of 2.5 cm diameter, up to 150 cm long, were prepared by this method. Temperature dependence of the gelation was studied, and activation energies of the process were determined.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable