Hostname: page-component-7b7567c8c-p67k6 Total loading time: 0 Render date: 2026-11-19T13:33:50.196Z Has data issue: false hasContentIssue false

Copper oxide nanoparticles for thin film photovoltaics

Published online by Cambridge University Press:  27 February 2013

Maurice Nuys
Affiliation:
Institute of Energy and Climate Research 5 -Photovoltaics-, Forschungszentrum Jülich GmbH, D-52425 Jülich Germany
Jan Flohre
Affiliation:
Institute of Energy and Climate Research 5 -Photovoltaics-, Forschungszentrum Jülich GmbH, D-52425 Jülich Germany
Christine Leidinger
Affiliation:
Institute of Energy and Climate Research 5 -Photovoltaics-, Forschungszentrum Jülich GmbH, D-52425 Jülich Germany
Florian Köhler
Affiliation:
Institute of Energy and Climate Research 5 -Photovoltaics-, Forschungszentrum Jülich GmbH, D-52425 Jülich Germany
Reinhard Carius
Affiliation:
Institute of Energy and Climate Research 5 -Photovoltaics-, Forschungszentrum Jülich GmbH, D-52425 Jülich Germany
Get access

Abstract

Commercially available tenorite (CuO) nanoparticles (NPs) were investigated in particular with respect to their suitability for photovoltaic applications. NPs with a diameter of about 30 nm were step wise annealed up to 1000°C in nitrogen atmosphere. The influence of the annealing treatment on the structural and electronic properties was investigated by Raman, photoluminescence (PL) and photothermal deflection spectroscopy (PDS) as well as X-ray diffraction measurements. Size, shape, and phase of the untreated NPs are analyzed by TEM measurements. The PL and PDS results show a strong increase of the tenorite band edge emission at about 1.3 eV accompanied by a decreasing sub gap absorption with increasing annealing temperature up to 700°C. According to literature, a phase transition from tenorite to cuprite (Cu2O) was expected and observed after annealing at 800°C. Strong cuprite band edge emission at about 2 eV accompanied by very weak defect and possibly tenorite band edge emission was found for samples annealed at 800°C and 1000°C.

Information

Type
Articles
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable