Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-17T04:12:37.652Z Has data issue: false hasContentIssue false

Corrosion Induced Hydrogen Evolution on High Level Waste Overpack Materials in Synthetic Groundwaters and Chloride Solutions

Published online by Cambridge University Press:  26 February 2011

J. P. Simpson
Affiliation:
Sulzer Brothers Ltd. CH-8401 Winterthur, Switzerland.
R. Schenk
Affiliation:
Sulzer Brothers Ltd. CH-8401 Winterthur, Switzerland.
Get access

Abstract

Hydrogen evolution from anoxic corrosion of cast steel overpacks in high-level waste repositories is an important issue for design if, as has been estimated, the hydrogen is prevented from escaping by diffusion by a low permeability compacted bentonite backfill.

Evaluation of the corrosion results showed three basic types of corrosion behaviour: general corrosion with oxide layer formation, unstable corrosion behaviour with pitting or macro-element formation and stable passive behaviour.

Cast steel containers under Swiss repository conditions are expected to suffer general corrosion with oxide layer formation. This behaviour gives the highest long term corrosion rates (2–5 μm/a) without local attack, above the 0.03–0.8 μm/a tolerated for hydrogen escape by diffusion but below the 20 μm/a assumed for overpack design.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable