Hostname: page-component-7b7567c8c-fvjsw Total loading time: 0 Render date: 2026-11-17T05:36:54.055Z Has data issue: false hasContentIssue false

Corrosion of Construction Materials in Clay Environments*

Published online by Cambridge University Press:  15 February 2011

Jozef Dresselaers
Affiliation:
SCK/CEN Studiecentrum voor Kernenergie, Boeretang 200, B-2400 Belgium
Florent Casteels
Affiliation:
SCK/CEN Studiecentrum voor Kernenergie, Boeretang 200, B-2400 Belgium
Hugo Tas
Affiliation:
SCK/CEN Studiecentrum voor Kernenergie, Boeretang 200, B-2400 Belgium
Get access

Abstract

The corrosion rate and mechanism of construction materials of galleries and casings for boreholes (possibly to be used as consumable overpack of HLW canisters) have been evaluated after a first campaign of corrosion experiments in direct contact with clay, in a humid clay atmosphere and in a gas corrosion chamber. The envisaged construction material is ductile iron (grade 60) and has been tested with and without metallic and organic coatings. The corrosion mechanism is governed by the formation of a rust scale composed of Fe3O4 and C. Preferential attack underneath the surface reaction layer is associated with the progress of a reaction front at the interface between the graphic nodules or flakes and the ferritic or pearlitic structure.

Post-corrosion analyses of old gray iron coal mine shafts exposed for 60 and 90 years in well defined conditions are included to validate the use of the results of the short-time tests for very long exposure times.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable