Hostname: page-component-7b7567c8c-8p88z Total loading time: 0 Render date: 2026-11-19T21:10:02.974Z Has data issue: false hasContentIssue false

Corrosion of Copper-Based Materials in Irradiated Moist air Systems

Published online by Cambridge University Press:  28 February 2011

Donald T. Reed
Affiliation:
Chemical Technology Division, Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439–4837
Richard A. Van Konynenburg
Affiliation:
Lawrence Livermore National Laboratory, P. O. Box 808, Livermore, CA 94550
Get access

Abstract

The atmospheric corrosion of oxygen-free copper (CDA-102), 70/30 copper-nickel (CDA-715), and 7% aluminum bronze (CDA-613) in an irradiated moist air environment was investigated. Experiments were performed in both dry and 40% RH (@90°C) air at temperatures of 90 and 150°C. Initial corrosion rates were determined based on a combination of weight gain and weight loss measurements. Corrosion products observed were identified. These experiments support efforts by the Yucca Mountain Project (YMP) to evaluate possible metallic barrier materials for nuclear waste containers.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable