Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-14T20:06:25.907Z Has data issue: false hasContentIssue false

Coupled Chemical and Diffusion Model for Compacted Bentonite

Published online by Cambridge University Press:  15 February 2011

M. Olin
Affiliation:
VTT Chemical Technology, P.O.Box 1404 (Otakaari 3A, Espoo), FIN-02044 VTT, Finland
J. Lehikoinen
Affiliation:
VTT Chemical Technology, P.O.Box 1404 (Otakaari 3A, Espoo), FIN-02044 VTT, Finland
A. Muurinen
Affiliation:
VTT Chemical Technology, P.O.Box 1404 (Otakaari 3A, Espoo), FIN-02044 VTT, Finland
Get access

Abstract

A chemical equilibrium model has been developed for ion-exchange and to a limited extent for other reactions, such as precipitation or dissolution of calcite or gypsum, in compacted bentonite water systems. The model was successfully applied to some bentonite experiments, especially as far as monovalent ions were concerned. The fitted log-binding constants for the exchange of sodium for potassium, magnesium, and calcium were 0.27, 1.50, and 2.10, respectively.In addition, a coupled chemical and diffusion model has been developed to take account of diffusion in pore water, surface diffusion and ion-exchange. The model was applied to the same experiments as the chemical equilibrium model, and its validation was found pardy successful. The above values for binding constants were used also in the coupled model. The apparent (both for anions and cations) and surface diffusion (only for cations) constants yielding the best agreement between calculated and experimental data were 3.0×10-11 m2/s and 6.0×10-12m2/s, respectively. These values are questionable, however, as experimental results good enough for fitting are currently not available.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable