Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-16T17:51:25.810Z Has data issue: false hasContentIssue false

Creating Dense, Constrained Ce0.9Gd0.1O1.95 Films at Low Temperature for SOFC Applications

Published online by Cambridge University Press:  01 February 2011

Jason D. Nicholas
Affiliation:
JDNicholas@lbl.gov, University of California at Berkeley, Materials Science and Engineering, 210 Hearst Memorial Mining Building, Berkeley, CA, 94703, United States, 510-717-2527, 510-486-6898
Lutgard C. De Jonghe
Affiliation:
LCDeJonghe@lbl.gov, University of California at Berkeley, Materials Science and Engineering Department, 210 Hearst Memorial Mining Building, Berkeley, CA, 94720, United States
Get access

Abstract

We have investigated the effect of various dopants on the sintering characteristics of Ce0.9Gd0.1O1.95 (CGO) and found that 99% dense electrolyte pellets can be produced at the record low temperature of 800°C (as opposed to the 1400°C typically needed) by sintering Ce0.9Gd0.1O1.95 with as little 3mol% lithium. Our studies indicate that doping the CGO surface with lithium nitrate, as opposed to using alternative lithium salts, produces the largest decrease in sintering temperature. Unlike other dopants that lower the sintering temperature by altering the near grain boundary vacancy concentration, lithium lowers the sintering temperature through the formation of an intergranular liquid phase. This liquid phase allows fully dense, completely constrained CGO films to be produced on inert substrates at temperatures as low as 950°C.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable