Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T17:19:28.404Z Has data issue: false hasContentIssue false

The Critical Stress for Plastic Deformation in Ni3(Al,Hf) Single Crystals.

Published online by Cambridge University Press:  01 January 1992

P. Spätig
Affiliation:
Ecole Polytechnique Fèdèrale de Lausanne, Institut de Gènie Atomique, Dèpartement de Physique, 1015 Lousanne, (Switzerland)
J. Bonneville
Affiliation:
Ecole Polytechnique Fèdèrale de Lausanne, Institut de Gènie Atomique, Dèpartement de Physique, 1015 Lousanne, (Switzerland)
J-L. Martin
Affiliation:
Ecole Polytechnique Fèdèrale de Lausanne, Institut de Gènie Atomique, Dèpartement de Physique, 1015 Lousanne, (Switzerland)
Get access

Abstract

A new method of relaxation series is proposed which allows for the measurement of the apparent activation volumes and of the hardening correction terms. This method is successfully applied to the measurement of the effective activation volumes along the stress strain curves. A transition stress between a microplastic and a macroplastic domain can be unambiguously defined on the plots of the effective volume as a function of strain. The corresponding transition stress measured at three temperatures in the range of the flow stress anomaly (293K, 423K, 573K), agrees reasonably well with the values of τ0.2%. The latter stress was usually considered as the critical stress for plastic deformation, in former studies.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable