Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T23:06:55.557Z Has data issue: false hasContentIssue false

Cross-Sectional Tem Characterization of Structural Changes Produced In Silicon By One Micron Picosecond Pulses

Published online by Cambridge University Press:  26 February 2011

Arthur L. Smirl
Affiliation:
Hughes Research Laboratories, 3011 Malibu Canyon Road, Malibu, CA 90265
Ian W. Boyd
Affiliation:
Center for Applied Quantum Electronics, Department of Physics, North Texas State University, Denton, TX 76203
Thomas F. Boggess
Affiliation:
Center for Applied Quantum Electronics, Department of Physics, North Texas State University, Denton, TX 76203
Steven C. Moss
Affiliation:
Center for Applied Quantum Electronics, Department of Physics, North Texas State University, Denton, TX 76203
R.F. Pinizzotto
Affiliation:
Ultrastructure, Inc., 1850 Greenville Ave., Richardson, TX 75081
Get access

Abstract

Plan and cross-sectional transmission electron microscopy (TEM) has been used to examine the various bulk and surface structural changes observed in crystalline silicon following melting caused by the absorption of 1-μm pulses that are 4 ps in duration. We show for the first time that for picosecond excitation polycrystalline Si (p-Si), rather than singlecrystal Si, is always formed when the melt resolidifies. Specifically, cross-sectional TEM analyses indicate that a thin layer of fine-grained p-Si is formed at the interface of the melted region with the bulk. When the incident fluence is more than 10% above the melting threshold, the region between the surface and the fine-grained p-Si regrows as largergrain p-Si. This is the first reported observation of a large-grain p-Si layer on a fine-grain p-Si base in crystalline material. If the incident fluence is less than 10% above threshold, the region near the surface resolidifies as amorphous Si, but the narrow layer of fine-grained p-Si remains at the interface with the single crystal material. Present models for resolidification must be modified to account for these features.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable