Hostname: page-component-7b7567c8c-2n9c9 Total loading time: 0 Render date: 2026-11-18T05:53:21.233Z Has data issue: false hasContentIssue false

Crystallization Behavior of Chemically Prepared and Rapidly Solidified PbTiO3

Published online by Cambridge University Press:  25 February 2011

Robert W. Schwartz
Affiliation:
Department of Materials Science and Engineering, and The Center for Compound Semiconductor Microelectronics, University of Illinois at Urbana-Champaign, 105 S. Goodwin Avenue, Urbana, IL 61801
D. A. Payne
Affiliation:
Department of Materials Science and Engineering, and The Center for Compound Semiconductor Microelectronics, University of Illinois at Urbana-Champaign, 105 S. Goodwin Avenue, Urbana, IL 61801
Get access

Abstract

The crystallization behavior of chemically prepared and rapidly solidified PbTiO3 was investigated. Chemical methods were (i) polymeric sol-gel processing and (ii) co-precipitation of fine particles. Rapid solidification was obtained by a twin-roller quencher. Details are reported for the processing methods and the characteristics of the materials. X-ray diffraction and electron microscopy confirmed the amorphous nature of the prepared materials. Crystallization was examined as a function of heat-treatment conditions. Non-isothermal DSC was used to determine the kinetics of crystallization. Activation energies and frequency factors were determined. Co-precipitated PbTiO3 crystallized at the lowest temperature of 375 C, followed by sol-gel at 425 C, and rapidly solidified at 475 C. The results are interpreted in terms of processing routes, structural free-energies, available surface areas and fractional free volumes.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable