Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T15:17:34.846Z Has data issue: false hasContentIssue false

Current Status of Fabrication and Integration of Ferroelectric-Gate Fet's

Published online by Cambridge University Press:  10 February 2011

Hiroshi Ishiwara*
Affiliation:
Frontier Collaborative Research Center, Tokyo Institute of Technology 4259 Nagatsuda, Midoriku, Yokohama 226–8503 Japan
Get access

Abstract

Current status of fabrication and integration of ferroelectric-gate FET's is reviewed. Novel applications of ferroelectric-gate FET's are first discussed, which include a single-transistor-cell-type digital memory, reconfigurable LSI's, and an analog memory for an artificial neural network. In the neural network application, fabrication and basic operation of a pulse-frequency-modulation-type adaptive-learning neuron circuit are described as well as an SOI (silicon-on-insulator)-type FET array for synaptic connection is proposed.

Then. data retention characteristics of ferroelectric-gate FET's with MFIS (M : metal, F : ferroelectric, I : insulator (buffer layer), S : semiconductor) and MFMIS structures are discussed. It is shown that the important factors to improve the retention characteristics are (1) increase of the buffer layer capacitance, (2) decrease of the leakage current of both the ferroelectric film and buffer layer, and (3) optimization of the area ratio between the MFM and MIS parts in the MFMIS structure. Based on these considerations, MFMIS-FET's were fabricated using a stacked buffer layer of SrTa2O6/SiON; a current on/off ratio larger than 103 was obtained at a retention time of 10 hours.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable