Hostname: page-component-7b7567c8c-lpg2g Total loading time: 0 Render date: 2026-11-15T16:10:38.613Z Has data issue: false hasContentIssue false

CW Annealing Techniques for Junction Formation in Ge

Published online by Cambridge University Press:  15 February 2011

J.P. Lorenzo
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 01731
K. J. Soda
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 01731
D. Eirug Davies
Affiliation:
Rome Air Development Center, Hanscom AFB, MA 01731
Get access

Abstract

CW scanned Argon laser annealing is used to form photo diodes in single crystal Boron implanted germanium. The starting material is doped n–type to 4 × 1015 cm−3 and oriented 2° off the <100>. For annealing, a substrate temperature of 250°C is employed in conjunction with a beam spot diameter of 50 μm and scan speeds in the vicinity of 1 cm/sec. Pyrolytic oxides are deposited to provide a protective and antireflective coating. Devices are fabricated and display dark leakage characteristics of the order of ∼ 10−4 A/cm2 which is comparable to diodes made by more conventional techniques.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable