Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-14T07:40:50.933Z Has data issue: false hasContentIssue false
  • English
  • Français

Deformation and Failure Modes Under Compressive Loading in Lamellar Tial

Published online by Cambridge University Press:  22 February 2011

Ming Dao,
Bimal K. Kad and
Robert J. Asaro
Ming Dao
Affiliation:
Department of Applied Mechanics and Engineering Sciences University of California-San Diego, La Jolla, CA 92093-0411, U.S.A.
Bimal K. Kad
Affiliation:
Department of Applied Mechanics and Engineering Sciences University of California-San Diego, La Jolla, CA 92093-0411, U.S.A.
Robert J. Asaro
Affiliation:
Department of Applied Mechanics and Engineering Sciences University of California-San Diego, La Jolla, CA 92093-0411, U.S.A.
Get access

Abstract

A physically based micromechanical model is applied to study finite compressive deformation and failure in lamellar TiAl microstructures. Orientation dependent yielding of lamellar TiAl single crystals is specifically modeled. Finite element computations show that deformation is inherently non-uniform in the lamellar microstructure. Intergranular fracture (at low strains) and internal buckling (at high strains) are found to be two of the most important failure modes.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Inui, H., Oh, M. H., Nakamura, A. and Yamaguchi, M., Acta metall., 40 (1992) 3095.Google Scholar
2. Kad, B. K., Dao, M. and Asaro, R. J., Phil. Mag. A, in press, also this proceedings.Google Scholar
3. Asaro, R. J. and Rice, J. R., J. Mech. Phys. Solids, 25 (1977) 309.Google Scholar
4. Pierce, D., Asaro, R. J. and Needleman, A., Acta metall., 30 (1982) 1087.Google Scholar
5. McHugh, P. E., Asaro, R. J. and Shih, C. F., Acta metall., 41 (1993) 1461.Google Scholar
6. Dao, M. and Asaro, R. J., Mater. Sci. Eng. A, 170A (1993) 1951.Google Scholar
7. Harren, S. V., Dève, H. E. and Asaro, R. J., Acta metall., 36 (1988) 2435.Google Scholar
8. Mendiratta, M. G., Kim, Y-W. and Dimiduk, D. M., 1993, MRS Symp. Proc., 288 543.Google Scholar
9. Chan, K. S. and Kim, Y.-W., Metall. Trans. A, 24A (1993) 113.Google Scholar