Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-19T05:14:03.781Z Has data issue: false hasContentIssue false

Deformation Behavior in La55Al25Ni20 Metallic Glass

Published online by Cambridge University Press:  10 February 2011

Y. Kawamura
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980–8577, Japan, rivervil@imr.tohoku.ac.jp
T. Nakamura
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980–8577, Japan, rivervil@imr.tohoku.ac.jp
A. Inoue
Affiliation:
Institute for Materials Research, Tohoku University, Sendai 980–8577, Japan, rivervil@imr.tohoku.ac.jp
Get access

Abstract

We investigated the deformation behavior of the supercooled liquid in a La55Al25Ni20 (at.%) metallic glass ribbon that has a wide supercooled liquid region of 65 K before crystallization. The deformation of the metallic glass was divided into three types, namely, homogeneous deformations with and without a stress overshoot and an inhomogeneous deformation. The supercooled liquid above the glass transition temperature (Tg) exhibited a Newtonian viscosity and superplastic-like behavior during isothermal tensile deformation. The metallic glass was elongated as much as 1000 % at high strain rates ranging from 10−2 s−1 to 10o s−1 without embrittlement. The maximum elongation to failure was in excess of 1800 % at a strain rate of 1.7×10−1 s−1 and at 503 K (Tg+20 K, 0.71Tm) under about 40 MPa.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable