Hostname: page-component-7b7567c8c-7pwfn Total loading time: 0 Render date: 2026-11-17T12:45:27.306Z Has data issue: false hasContentIssue false

Degradation in aluminum resonant optical rod antennas

Published online by Cambridge University Press:  05 February 2015

Patrick M. Schwab
Affiliation:
Light Technology Institute (LTI), Karlsruhe Institute of Technology, Karlsruhe, GermanyInstitute of Microstructure Technology (IMT), Karlsruhe Institute of Technology, Karlsruhe, Germany
Carola Moosmann
Affiliation:
Light Technology Institute (LTI), Karlsruhe Institute of Technology, Karlsruhe, Germany
Katja Dopf
Affiliation:
Light Technology Institute (LTI), Karlsruhe Institute of Technology, Karlsruhe, Germany
Konstantin S. Ilin
Affiliation:
Institute for Micro- and Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology, Karlsruhe, Germany
Michael Siegel
Affiliation:
Institute for Micro- and Nanoelectronic Systems (IMS), Karlsruhe Institute of Technology, Karlsruhe, Germany
Uli Lemmer
Affiliation:
Light Technology Institute (LTI), Karlsruhe Institute of Technology, Karlsruhe, GermanyInstitute of Microstructure Technology (IMT), Karlsruhe Institute of Technology, Karlsruhe, Germany
Hans-Juergen Eisler
Affiliation:
Light Technology Institute (LTI), Karlsruhe Institute of Technology, Karlsruhe, Germany
Get access

Abstract

Resonant optical rod antennas are made from aluminum using electron-beam lithography and are optically characterized by linear dark-field microscopy and nonlinear multi-photon luminescence spectroscopy. It is demonstrated that by exciting close to the interband transition of aluminum at about 1.5 eV different radiative decay channels can be addressed. Over a period of weeks, a slight spectral red-shift and a decrease in the scattering intensity are observed due to the formation of a native oxide layer at the metal-air interface. To investigate the concurrent influence of shape transformation and dielectric environment on the spectral response function we carry out numerical calculations using finite difference time domain (FDTD) methods. It is found that the induced energy shift is mainly determined by the change of the dielectric constant in the nanovicinity resulting in an overall red-shift as seen in the experiment. These findings allow for a better understanding of designing and modeling plasmonic aluminum nanostructures for e.g. UV sensing where the shift in peak resonance and linewidth are key observables.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable