Hostname: page-component-7b7567c8c-w7t8q Total loading time: 0 Render date: 2026-11-18T03:09:51.997Z Has data issue: false hasContentIssue false

Deposition of PEDOT/SWCNT Composites by Inkjet Printing

Published online by Cambridge University Press:  01 February 2011

Peter David Angelo
Affiliation:
peter.angelo@utoronto.ca, University of Toronto, Chemical Engineering and Applied Chemistry, Toronto, Canada
Ramin R. Farnood
Affiliation:
ramin.farnood@utoronto.ca, University of Toronto, Chemical Engineering and Applied Chemistry, Toronto, Canada
Get access

Abstract

Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), or PEDOT:PSS, a conductive polymer suspension, as well as carbon nanotubes (CNTs), were incorporated into a conductive ink suitable for use in a piezoelectric inkjet printer. Viscosity, surface tension, and particle size of the ink were controlled to achieve stable, high-resolution printing. Passage of the CNTs through the filtration and jetting steps involved in printing was evaluated using scanning transmission electron microscopy (STEM), UV-visible spectroscopy, and zeta-potential measurements of the filtered and printed inks. Only single-walled nanotubes (SWCNTs) passed through the jetting stage in significant amounts. Printed PEDOT/SWCNT sheet resistance was effectively minimized at ˜1 kΩ/on cellulose acetate, in ink containing 6 w/w% of an aqueous SWCNT solution (approximately 0.04 w/w% SWCNTs).

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable