Hostname: page-component-7b7567c8c-tnkh4 Total loading time: 0 Render date: 2026-11-18T07:47:55.345Z Has data issue: false hasContentIssue false

Deposition Parameters for Sputter-Deposited Thin Film TiNi

Published online by Cambridge University Press:  16 February 2011

A.Peter Jardine*
Affiliation:
Dept. of Materials Science and Engineering SUNY at Stony Brook, Stony Brook, NY 11794
Get access

Abstract

Sputter deposition of TiNi has been problematic due to the extreme reactivity of titanium. There are several advantages in depositing TiNi with other metals, such as Ti and Cu, as the Shape Memory Effect properties can be changed selectively, including coring of the thin film. Simultaneous co-deposition of cored material using sputter deposition becomes technically difficult as this implies that the sample to target distance increases. In this paper, we discuss a relationship developed so that a basic base vacuum pressure can be found with target-sample distance and correlated with the observed phases for both Ti and TiNi samples. Practical limitations imposed by the vacuum system on both devices and device quality are discussed

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable