Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T06:02:21.821Z Has data issue: false hasContentIssue false

Design and Synthesis of Metals (Tungsten) with Structural Hierarchy for Very High Temperatures

Published online by Cambridge University Press:  21 February 2011

G. Welsch*
Affiliation:
Department of Materials Science and Engineering, 10900 Euclid Avenue, Case Western Reserve University, Cleveland, Ohio 44106, USA
Get access

Abstract

The strength of metals is limited by the weakest link in their microstructures. At high temperature, the weakest link is usually a grain boundary. Mobile dislocations represent another type of weak link. The strength-limitation by this two-level hierarchy of crystal defects can be minimized through microstructure design. Although the strengthening mechanisms differ for grain boundaries and dislocations, it is possible to design microstructural architectures that strengthen both. The design must take the stress state into consideration that the component will encounter during its later use. Processing strategies can then be devised for the synthesis of such components. It is imperative to stabilize the designed microstructure at high temperature because this will determine how well and how long the material will be able to perform. Design, synthesis and stabilization are discussed in the present paper. The lamp filament wire technology is the basis for a new method that enables the synthesis and stabilization of artificial microstructures in high-temperature materials.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable