Hostname: page-component-7b7567c8c-9cwtv Total loading time: 0 Render date: 2026-11-19T16:46:05.345Z Has data issue: false hasContentIssue false

Design of Microwave Vitrification Systems for Radioactive Waste

Published online by Cambridge University Press:  10 February 2011

T. L. White
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-8071, whitetl@ornl.gov
W. D. Bostick
Affiliation:
Oak Ridge K-25 Site, Oak Ridge, Tennessee 37831-7274, bostickwd@ornl.gov
C. T. Wilson
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-8071, whitetl@ornl.gov
C. R. Schaich
Affiliation:
Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-8071, whitetl@ornl.gov
Get access

Abstract

Oak Ridge National Laboratory (ORNL) is involved in the research and development of highpower microwave heating systems for the vitrification of Department of Energy (DOE) radioactive sludges. Design criteria for a continuous microwave vitrification system capable of processing a surrogate filtercake sludge representative of a typical waste-water treatment operation are discussed. A prototype 915-MHz, 75-kW microwave vitrification system or “microwave melter” is described along with some early experimental results that demonstrate a 4 to I volume reduction of a surrogate ORNL filtercake sludge.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable