Hostname: page-component-7b7567c8c-z4zkx Total loading time: 0 Render date: 2026-11-16T17:05:03.598Z Has data issue: false hasContentIssue false

Determining the Transport Properties of Rock Specimens Using an Improved Laboratory Through-Diffusion Technique

Published online by Cambridge University Press:  21 March 2011

M. Zhang
Affiliation:
Research Center for Deep Geological Environments National Institute of Advanced Industrial Science and Technology Higashi 1-1-1, Tsukuba, Ibaraki 305-8567, JapanResearch Center for Deep Geological Environments National Institute of Advanced Industrial Science and Technology Higashi 1-1-1, Tsukuba, Ibaraki 305-8567, Japan, m.zhang@aist.go.jp
M. Takeda
Affiliation:
Research Center for Deep Geological Environments National Institute of Advanced Industrial Science and Technology Higashi 1-1-1, Tsukuba, Ibaraki 305-8567, Japan
H. Nakajima
Affiliation:
Research Center for Deep Geological Environments National Institute of Advanced Industrial Science and Technology Higashi 1-1-1, Tsukuba, Ibaraki 305-8567, Japan
Get access

Abstract

The safe disposal of radioactive nuclear wastes using multi-barrier systems requires a good understanding of their transport properties in geological materials. When groundwater flow is very slow, the most important mechanisms of transport and retardation are diffusion through and sorption onto geological materials, and an evaluation of relevant parameters, particularly the effective diffusion coefficient and rock capacity factor (or sorption coefficient), is of fundamental importance to any safety assessment. Although laboratory diffusion tests can be used to determine these two parameters, conventional through-diffusion testing has some limitations, such as the need for a relatively long test time, cumbersome test procedures and the possibility of errors due to differences between analytical assumptions and actual test conditions. In this paper, we offer a rigorous solution to the through-diffusion test. Boundary conditions are improved by taking into account concentration changes in both the source and the measurement cells. A companion approach for back-calculating the effective diffusion coefficient and rock capacity factor is also proposed. The effectiveness and advantages of this improved technique are demonstrated using experimental data derived from a sedimentary rock sample taken from a research site in Japan.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable