Hostname: page-component-7b7567c8c-wxvwp Total loading time: 0 Render date: 2026-11-18T02:08:56.448Z Has data issue: false hasContentIssue false

Development of a Novel Metal Epitaxy Method towards Ni Based Electro-magnetic Hybrid Systems

Published online by Cambridge University Press:  01 February 2011

Akifumi Matsuda
Affiliation:
matsuda.a.aa@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, Kanagawa, 226-8503, Japan, +81-45-924-5331, +81-45-924-5365
Masayasu Kasahara
Affiliation:
kasahara.m.aa@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, 226-8503, Japan
Takahiro Watanabe
Affiliation:
watanabe.t.al@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, 226-8503, Japan
Wakana Hara
Affiliation:
hara.w.aa@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, 226-8503, Japan
Sei Otaka
Affiliation:
otaka.s.ac@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, 226-8503, Japan
Kouji Koyama
Affiliation:
k-koyama@namiki.co.jp, Namiki Precision Jewel Co., Ltd., Crystal Growth Laboratory, 3-8-22 Shinden, Adachi, Tokyo, 123-8511, Japan
Mamoru Yoshimoto
Affiliation:
yoshimoto.m.aa@m.titech.ac.jp, Tokyo Institute of Technology, Department of Innovative and Engineered Materials, 4259-R3-6 Nagatsuta, Midori, Yokohama, 226-8503, Japan
Get access

Abstract

The epitaxial Ni (111) thin film on the oxide substrate could be obtained by a novel epitaxy method, employing pulsed laser deposition (PLD) of NiO (111) epitaxial film on the sapphire (α-Al2O3 single crystal) substrate and successive hydrogen reduction of NiO. The NiO (111) epitaxial film was deposited on the sapphire (0001) substrate at room-temperature by PLD, and then reduced into the Ni epitaxial film by annealing (300 °C to 500 °C) in the hydrogen-atmosphere. On the other hand, the polycrystalline Ni metal thin film was obtained by reduction of the polycrystalline NiO film, indicating necessity of epitaxial growth for the precursor oxide thin film in the metal epitaxy. The present epitaxy method suggests the possible formation of [Ni/α-Al2O3] epitaxial multilayer via selective reduction of oxide multilayer.

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable